Setting up WISP

Lots of good tips from here: http://www.microsofttranslator.com/bv.aspx?from=&to=en&a=http%3A%2F%2Fwww.qsl.net%2Fpy4zbz%2Ffalconsat.htm

Installed the HW Virtual Serial Port to create a COM port from the output of the Soundmodem HS.




See additional WISP notes in https://www.blogger.com/blogger.g?blogID=2837525951324922303#allposts

8/2/18 - looks like possible success! I tried running WISP on a recorded SDR track - it listed the files that it had downloaded and tried to transmit to get the fills (the 847 was off so it didn't really transmit, but it did key the VOX on the RigBlaster). So maybe it will actually work. I set the programs up to track the FalconSat passes overnight and tomorrow AM, so we'll see if it actually gets the data. Here's how it looks:


8/4/148 - SUCCESS! We set the computer audio output to 70 after trying the lowest and highest output levels that could be decoded with a FT-1D. 


8/9/18 - Increased the audio level to about 70% which seems to increase the connects to the satellite. Today's screen looked like this:
In the modem window see many connection packets, so it looks like a good packet connection. But it looks like we have a directory error that may be impeding updating the directory. Research needed...
Location: Woodbury, NJ 08096, USA

Comments

Post a Comment

Popular posts from this blog

How We Built the GOES Reception Project

Image
How We Built the GOES Reception Project Updated 12/1/18 Building our functional GOES 16 receiver was a process of broad web research and cobbling together the experiences of many other successful experimenters. We found lots of individual articles on antenna selection, software, and many other topics, but nothing that really pulled everything together. Hopefully this article will provide a comprehensive overview of our project. If you've found other tips that were useful or have questions or comments about the project, please leave them in the Comments box below and we'll try to reply when possible.  Thanks to the many experimenters whose work we copied and implemented in making this project work. Location (QTH) Our station is located at the "clubhouse" of the Gloucester County Amateur Radio Club, located in Mullica Hill New Jersey. The clubhouse provides a dedicated location for radio experimentation and radio operations, complete with a 100 foot tower for VHF...
Read more

GOES Satellite Reception Project

Image
We're getting interested in listening to the GOES geosync weather satellites, so this page is a collection of links to help get started with that project. We'll report on progress as it happens. https://www.rtl-sdr.com/setting-up-a-goes-weather-satellite-antenna-system/ https://www.rtl-sdr.com/receiving-goes-weather-satellite-hrit-with-an-sdrplay-and-2-4-ghz-wifi-grid-antenna/ Detailed article: https://www.teske.net.br/lucas/2016/10/goes-satellite-hunt-part-1-antenna-system/ Good building options: https://www.rtl-sdr.com/building-a-low-cost-goes-weather-satellite-receiver-with-an-rtl-sdr/ Here's the link to an antenna:  https://www.amazon.com/1850-1990-Parabolic-Antenna-Die-Cast-15dBi/dp/B06ZYJ3P82/ref=sr_1_2?ie=UTF8&qid=1536255463&sr=8-2&keywords=parabolic+grid+antenna+1.9 Link to antenna pointing from W2MMD: https://www.satellite-calculations.com/Satellite/Catalog/catalogID.php?41866 Info on GOES 16, the east-coast satellite: https://en.wik...
Read more

Building the Raspberry Pi NOAA Satellite Station

Image
Building the Raspberry Pi NOAA Satellite Station After building the station to receive the GOES geostationary weather satellite, constructing the NOAA satellite station was a relative breeze. The NOAA series of satellites (NOAA 15, 18 and 19) are much more similar to amateur satellites than the GOES satellite – they operate in the 137 mhz band, are in low-earth orbits and transmit analog images rather than the complex error-corrected digital images of the GOES satellites. I simply followed the “ Instructables ” project design and it mostly worked the first time. The overall concept is simple – the project uses a inexpensive RTL-SDR radio and a Raspberry P i computer along with free software that you install on the Pi. There are several components to the software – first it uses the Gpredict program to set up times (cron jobs) for each satellite based on the next pass for each of the three satellites. At the scheduled time the Pi runs a script that will enable the RTL-SDR receiv...
Read more